logo-ezconcept@2x
MiB Logo Panel Colour

Custom Shadowline

Modern interior design is characterised by clean lines and flush finishes. Shadowline sections provide simple yet effective details to interior spaces, such as ceiling perimeters, doorways and skirting boards, amongst other applications. To create a unique profile for your project EZ Concept® presents Custom Shadowline; made to meet your specific size requirements for the perfect fit in your design.

AluBase Shadowline

FEATURES

  • Create the exact shadowline you need.
  • Allow for variations in floor height or plaster thickness using a custom formed section.
  • Heavy duty material to create a perfect straight and clean line

Part No.
'a' Section Width
'b' Section Height
Length
SL-1214100
12mm6mm3000mm
SL-1212100 12mm12mm3000mm
SL-12110012mm25mm3000mm
SL- 581410016mm6mm3000mm
SL -581210016mm12mm3000mm
SL -58110016mm25mm3000mm

EZ Concept Product Specification Brochure

EZ Concept Look Book

Custom Shadowline Datasheet

EZ Concept Finishing Products Brochure Cover

EZ Concept Finishing Products Brochure

FAQ

Do I have to use any special paint or preparation methods on EZ Concept products?

EZ Concept products are manufactured from zinc annealed steel and meet the finished surfaces standard AS/NZS 2311:2009 to ensure it can be painted immediately with standard wall paints, without any special preparation, so long as it is free of dust, dirt and oil.

Can I fit architraves with the EzyJamb system?

Yes, architraves can be fitted, but the EzyJamb concept is designed to create an ‘architrave-free’ opening.

Will plaster crack around the edges of the EzyJamb?

Plaster around the edges of the EzyJamb will not crack if the EzyJamb is installed according to the installation guide — i.e. must be screwed off every 200mm and double screwed at the hinge points and top corners. EzyJamb then becomes an integral part of the wall.

Can EzyJamb be used in a doorway with no header?

Yes, custom made EzyJambs are available with no header for full height doors.

What jamb studs do I use for the opening of an EzyJamb?

The manufacturer strongly recommends a timber stud or a 0.75 BMT metal stud on both sides of the opening.

What material are EZ Concept products made from?

EZ Concept products are manufactured from highest quality zinc annealed cold-formed steel sections.

Are your frames welded?

EzyJamb frames are not welded and are clipped together using a unique EzyJamb system that ensures an easy install and smooth finish.

Key Features
AluBase Shadowline

FEATURES

  • Create the exact shadowline you need.
  • Allow for variations in floor height or plaster thickness using a custom formed section.
  • Heavy duty material to create a perfect straight and clean line

Part No.
'a' Section Width
'b' Section Height
Length
SL-1214100
12mm6mm3000mm
SL-1212100 12mm12mm3000mm
SL-12110012mm25mm3000mm
SL- 581410016mm6mm3000mm
SL -581210016mm12mm3000mm
SL -58110016mm25mm3000mm
Resources

EZ Concept Product Specification Brochure

EZ Concept Look Book

Custom Shadowline Datasheet

EZ Concept Finishing Products Brochure Cover

EZ Concept Finishing Products Brochure

FAQ

FAQ

Do I have to use any special paint or preparation methods on EZ Concept products?

EZ Concept products are manufactured from zinc annealed steel and meet the finished surfaces standard AS/NZS 2311:2009 to ensure it can be painted immediately with standard wall paints, without any special preparation, so long as it is free of dust, dirt and oil.

Can I fit architraves with the EzyJamb system?

Yes, architraves can be fitted, but the EzyJamb concept is designed to create an ‘architrave-free’ opening.

Will plaster crack around the edges of the EzyJamb?

Plaster around the edges of the EzyJamb will not crack if the EzyJamb is installed according to the installation guide — i.e. must be screwed off every 200mm and double screwed at the hinge points and top corners. EzyJamb then becomes an integral part of the wall.

Can EzyJamb be used in a doorway with no header?

Yes, custom made EzyJambs are available with no header for full height doors.

What jamb studs do I use for the opening of an EzyJamb?

The manufacturer strongly recommends a timber stud or a 0.75 BMT metal stud on both sides of the opening.

What material are EZ Concept products made from?

EZ Concept products are manufactured from highest quality zinc annealed cold-formed steel sections.

Are your frames welded?

EzyJamb frames are not welded and are clipped together using a unique EzyJamb system that ensures an easy install and smooth finish.

Explore the EZ Concept range

Newsletter

News letter in footer section

"(Required)" indicates required fields

This field is for validation purposes and should be left unchanged.
Studco Building Systems UK Ltd registered in England and Wales: 10399531